Sony HDR CX12 Operating Guide - Page 10
Available running time for the, supplied battery pack, To charge the battery pack using only the AC - hd camcorder
UPC - 027242732438
View all Sony HDR CX12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BATT (battery) release lever To charge the battery pack using only the AC Adaptor Slide the POWER switch to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on your camcorder. POWER swith With the mark on the left DC plug DC IN jack Open the jack cover. Available running time for the supplied battery pack Charging time: Approximate time (min.) required when you fully charge a completely exhausted battery pack. Recording/Playback time: Approximate time (min.) available when you use a fully charged battery pack. "HD" stands for high definition image quality, and "SD" stands for standard image quality. US 10 Charging time Recording time*1*2 Continuous recording time Typical recording time*3 Playback time*2 (Unit:min.) HD SD 135 100 130 50 65 180 195 *1 [REC MODE]: SP *2 When the LCD backlight is on *3 Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. On the battery pack When you remove the battery or disconnect the AC Adaptor, slide the POWER switch to OFF (CHG) and make sure that the (Movie) lamp/ (Still) lamp (p. 12)/Access lamp (p. 13)/QUICK ON lamp (p. 19) are turned off. The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the power cord (mains lead) is disconnected from the wall outlet (wall socket). On the charging/recording/playback time Times measured with the camcorder at 25°C (77 ˚F). 10°C to 30°C (50 ˚F to 86 ˚F) is recommended. The available recording and playback time will be shorter when you use your camcorder in low temperatures. The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.