Sony HDR CX12 Operating Guide - Page 9

Getting Started Step 1: Charging the battery pack Getting Started POWER switch /CHG lamp DC IN jack DC plug Battery pack AC Adaptor Power cord (Mains lead) To the wall outlet (wall socket) You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your camcorder.  Notes  You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder. 1 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the  mark on the DC plug is facing up. 4 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 5 Set the camcorder onto the Handycam Station securely. The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. 2 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). 3 Slide the POWER switch in the direction of the arrow to OFF (CHG) (the default setting). To remove the battery pack Slide the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack. US