Sony HDR FX7 Operating Instructions - Page 50

Locating a scene on a tape (Continued) 3 Press . (previous)/> (next) 2 on the Remote Commander to select a recording date. You can select the previous or the next date of the present point on the tape. Playback starts automatically from the point where the date changes. To cancel the operation Press STOP 6 on the Remote Commander. b Notes • If one day's recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes. • The Date search will not function correctly when there is a blank section between recorded sections on the tape. Searching for a recording start point (Index search) You can locate the point where an index signal is recorded (p. 44). 1 Set the POWER switch to VCR. Playback starts automatically from the point where the selected index signal is recorded. To cancel the operation Press STOP 6 on the Remote Commander. b Notes • If index recording is less than 2 minutes, your camcorder may not accurately find the index point. • The Index search will not function correctly when there is a blank section between recorded sections on the tape. 2 Press SEARCH M. 1 on the Remote Commander repeatedly to select [INDEX SEARCH]. 3 Press . (previous)/> (next) 2 on the Remote Commander to select an index point. You can select the index signal of the point that you want to start playing back the tape. 50