Sony HDR FX7 Operating Instructions - Page 77
Jacks on your camcorder, Using an i.LINK cable optional, Dubbing/Editing
UPC - 027242701946
View all Sony HDR FX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Jacks on your camcorder Open the jack cover and connect the cable. Dubbing/Editing 1 2 Using an i.LINK cable (optional) The dubbed format (HDV/DV) differs depending on the recording format or the format supported by the VCR/DVD device. See the table below for selecting the appropriate settings, and perform necessary menu setting. b Note • Disconnect the i.LINK cable before changing these menu settings, otherwise the VCR/DVD device may not correctly identify the video signal. z Tip • This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the device to be connected. Copy format Camcorder recording format Format supported by the VCR/DVD device HDV format*1 DV format Menu setting [VCR HDV/DV] [i.LINK CONV] (p. 69) (p. 70) Copy HDV recording as HDV HDV HDV -*3 [OFF] Convert HDV recording to DV HDV DV DV [AUTO] [ON] Copy DV recording as DV DV DV DV When tape is recorded in both HDV and DV format [OFF] Convert both HDV and DV format to DV HDV/DV DV DV [AUTO] [ON] Copy only portions HDV HDV -*3 recorded in HDV format DV -*2 [HDV] [OFF] -*3 Copy only portions HDV -*2 -*2 recorded in DV format [DV] DV DV DV [OFF] *1 Recording device compliant with the HDV1080i specification. *2 The tape advances, but no video or sound is recorded (blank). *3 Picture is not recognized (no recording is made). Continued , 77