Sony HDR FX7 Operating Instructions - Page 93
Cassette tapes/Memory Stick Duo, The cassette cannot be ejected from the compartment.
UPC - 027242701946
View all Sony HDR FX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Troubleshooting The battery pack discharges too quickly. • Ambient temperature is too high or low, or the battery pack has not been charged enough. This is not a malfunction. • Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace it with a new one (p. 18, 108). The picture remains on the LCD screen. • This occurs if you disconnect the DC plug or remove the battery pack without turning off the power first. This is not a malfunction. The picture in the viewfinder is not clear. • Move the viewfinder lens adjustment lever until the picture appears clearly (p. 22). The picture in the viewfinder has disappeared. • If you change [VF POWERMODE] to [AUTO], the finder light remains off while the LCD panel is open (p. 67). The supplied Remote Commander does not function. • Set [REMOTE CTRL] to [ON] (p. 75). • Remove any obstructions between the Remote Commander and the remote sensor. • Keep strong light sources, such as sunlight or overhead lighting, away from the remote sensor, otherwise the Remote Commander may not function properly. • Insert a fresh battery in the compartment with its +/- terminals matching those of the compartment (p. 123). Another VCR malfunctions when you use the supplied Remote Commander. • Select a commander mode other than VTR 2 for your VCR. • Cover the sensor of your VCR with black paper. Cassette tapes/"Memory Stick Duo" The cassette cannot be ejected from the compartment. • Make sure the power source (battery pack or AC Adaptor) is connected correctly (p. 18). • Moisture condensation has occurred inside the camcorder (p. 111). The Cassette Memory indicator or title display does not appear while using a cassette with Cassette Memory. • This camcorder does not support Cassette Memory, so the indicator does not appear. The remaining tape indicator is not displayed. • Set [ REMAINING] to [ON] to always display the remaining tape indicator (p. 68). Continued , 93