Sony HT-X8500 Operating Instructions - Page 18
Connecting a TV Compatible with eARC, Setting the HDMI Signal, Format to Watch 4K Video, Content
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
6 Turn on the TV. 7 Turn on the Sound Bar. Tip 4K content can be watched by a device compatible with HDCP2.2 or HDCP2.3 even though devices with different versions (ex. TV compatible with HDCP2.2 and 4K device compatible with HDCP2.3) are connected. Setting the HDMI Signal Format to Watch 4K Video Content To watch 4K video content, select the appropriate setting for the connected 4K TV and 4K device. Press and hold NEWS for 5 seconds to select the HDMI signal format setting. Standard format Select when the connected TV and devices support standard bandwidth video formats. The Dolby ATMOS and DTS:X indicators flash. Enhanced format Select when both the connected TV and devices support high bandwidth video formats such as 4K 60p 4:4:4, etc. The HDMI and BLUETOOTH indicators flash. For the relation of the HDMI signal format setting, supported video format signals, and HDMI cables to be used, see "Supported HDMI Video Formats" (page 41). Notes • Depending on the TV, the TV setting for HDMI output may be required. Refer to the operating instructions of the TV. • When the picture is not displayed after "Enhanced format" is set, set it to "Standard format." Connecting a TV Compatible with eARC The Sound Bar is compatible with eARC (Enhanced Audio Return Channel). eARC is a new function standardized by HDMI 2.1 and supports latest audio formats in addition to audio formats that are supported with existing ARC (Audio Return Channel). You can enjoy object audio content such as Dolby Atmos - Dolby TrueHD and DTS:X, or multi-channel LPCM content that cannot be transmitted with ARC by connecting the Sound Bar and TV compatible with eARC using an HDMI cable. For the connection, refer to Startup Guide (separate document). Preparing to Use the eARC Function The default setting of the eARC function is on. If the eARC function is set to off, press and hold SPORTS for 5 seconds to set the eARC function to on (page 29). The eARC function is enabled and it works while connecting a TV compatible with eARC. The ARC function works while connecting a TV compatible with ARC (not compatible with eARC). Note When the eARC function is set to on, make sure to check the eARC setting of the connected TV. For details, refer to the operating instructions of the TV. 18US