Sony HT-X8500 Operating Instructions - Page 36
Remote Control, Others, does not function.
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Bring the Sound Bar and the BLUETOOTH device closer together. Pair the Sound Bar and BLUETOOTH device again. You may need to cancel the pairing with the Sound Bar using your BLUETOOTH device first. Pairing information may be deleted. Perform pairing operation again (page 26). Sound of the connected BLUETOOTH mobile device is not output from the Sound Bar. Make sure that the BLUETOOTH indicator on the Sound Bar is lit (page 27). Bring the Sound Bar and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from the Sound Bar. Remove any obstacle between the Sound Bar and the BLUETOOTH device or move the Sound Bar away from the obstacle. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. Remote Control The remote control of the Sound Bar does not function. Point the remote control at the remote control sensor on the Sound Bar (page 8). Remove any obstacles in the path between the remote control and the Sound Bar. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. TV remote control does not work. This problem might be solved by enabling the IR repeater function (page 20). Others The Control for HDMI function does not work properly. Check the connection with the Sound Bar (refer to the supplied Startup Guide). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the Sound Bar, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the Sound Bar support the Control for HDMI function. Enable the Control for HDMI function on the devices connected to the Sound Bar. For details, refer to the operating instructions of your device. The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: - Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices - Playback devices (Blu-ray Disc player, DVD player, etc.): up to 3 devices - Tuner-related devices: up to 4 devices - Audio system (receiver/ headphones): up to 1 device (used by the Sound Bar) All the indicators flash quickly and the Sound Bar is turned off. Disconnect the AC power cord (mains lead) and make sure nothing is 36US