Sony HT-X8500 Operating Instructions - Page 19
Mounting the Sound Bar on a Wall, Prepare two screws not supplied, that are suitable for the wall
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Mounting the Sound Bar on a Wall You can mount the Sound Bar on a wall. 1 Prepare two screws (not supplied) that are suitable for the wall mount holes on the rear of the Sound Bar. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 5.1 mm (13/64 in) Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely in the wall beam. Install the speakers horizontally, hung by screws in studs in a continuous flat section of the wall. • Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural disaster, etc. 10 mm (13/32 in) Hole on the rear of the Sound Bar 2 Stick WALL MOUNT TEMPLATE (supplied) on a wall. Center of the TV Adhesive tape, etc. WALL MOUNT TEMPLATE 1 Align TV CENTER LINE () of WALL MOUNT TEMPLATE with the center line of your TV. 2 Align TV BOTTOM LINE () of WALL MOUNT TEMPLATE with the bottom of your TV, then stick WALL MOUNT TEMPLATE on a wall by using a commercially available adhesive tape, etc. 19US