Sony HT-X8500 Operating Instructions - Page 31
Using the “BRAVIA” Sync Function, Saving Power Consumption, Sound mode/Scene Select, Function
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using the "BRAVIA" Sync Function In addition to the Control for HDMI function, you can also use the "BRAVIA" sync function such as the Sound mode/ Scene Select function. Note This function is proprietary function of Sony. This function cannot operate with products other than those manufactured by Sony. Sound mode/Scene Select Function The sound mode of the Sound Bar is automatically switched according to the setting of the TV's Scene Select function or sound mode. For details, refer to the operating instructions of your TV. Set the sound mode to AUTO SOUND (page 22). Saving Power Consumption To use the Sound Bar while saving power consumption, change the following settings. Turn the Sound Bar Off by Detecting the Using State When you set the auto standby function to on, the Sound Bar enters standby mode automatically when you do not operate the Sound Bar for about 20 minutes and the Sound Bar is not receiving an input signal. Press and hold INDICATORS for 5 seconds to set the function to on or off. Auto standby on The HDMI and BLUETOOTH indicators flash. Auto standby off The Dolby ATMOS and DTS:X indicators flash. Saving Power in Standby Mode To save power consumption during the standby mode, check that you have made the following settings: - BLUETOOTH standby mode is set to off (page 28). (The default setting is on.) - Control for HDMI function is set to off (page 29). (The default setting is on.) - HDMI standby through setting is set to off (page 30). (The default setting is auto.) 31US