Sony HT-X8500 Operating Instructions - Page 37
Resetting the Sound Bar, The Sound Bar does not work
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
obstructing the ventilation holes of the Sound Bar. Sensors of the TV do not work properly. The Sound Bar may block some sensors (such as the brightness sensor), the remote control receiver of your TV or the emitter for 3D glasses (infrared transmission) of a 3D TV that supports the infrared 3D glass system, or wireless communication. Move the Sound Bar away from the TV within a range that allow those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions supplied with the TV. Wireless function (the BLUETOOTH function) is unstable. Do not place metal objects other than a TV around the Sound Bar. Music that you are not familiar with suddenly plays. The pre-installed sample music may have been played. Press on the Sound Bar to stop playback. The Sound Bar does not work properly. The Sound Bar may be in demo mode. To cancel demo mode, reset the Sound Bar. Press and hold - (volume) and (power) on the Sound Bar for more than 5 seconds (page 37). Resetting the Sound Bar If the Sound Bar still does not operate properly, reset the Sound Bar as follows. 1 Press and hold - (volume) and (power) on the Sound Bar for more than 5 seconds. All the indicators on the Sound Bar flash 4 times and the settings return to their initial status. 2 Disconnect the AC power cord (mains lead). 3 Connect the AC power cord (mains lead), then press to turn on the Sound Bar. Tip The default settings are underlined on each feature description. 37US