Sony HT-X8500 Operating Instructions - Page 32
Troubleshooting
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Troubleshooting Troubleshooting If you experience any of the following difficulties while using the Sound Bar, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The Sound Bar does not power up. Check that the AC power cord (mains lead) and AC adapter are connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes. The Sound Bar is turned off automatically. The auto standby function is working. Set the auto standby function to off (page 31). The Sound Bar does not turn on even when the TV is turned on. Set the Control for HDMI function to on (page 29). The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV. Check the speaker settings of the TV. The Sound Bar power syncs with the speaker settings of the TV. For details, refer to the operating instructions of your TV. Depending on the TV, if the sound was output from the speakers of the TV the previous time, the Sound Bar may not turn on by interlocking with the TV power even when the TV is turned on. The Sound Bar turns off when the TV is turned off. Check the setting of the Control for HDMI function (page 29). When the Control for HDMI function is set to on and the input of the Sound Bar is the TV or HDMI input, the Sound Bar turns off automatically when you turn off the TV. The Sound Bar does not turn off even when the TV is turned off. Check the setting of the Control for HDMI function (page 29). To turn the Sound Bar off automatically by interlocking with the TV power, set the Control for HDMI function to on (page 29). This function works only if the input of the Sound Bar is the TV or HDMI input. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV. The Sound Bar cannot be turned off. The Sound Bar may be in demo mode. To cancel demo mode, reset the Sound Bar. Press and hold (power) and - (volume) on the Sound Bar for more than 5 seconds (page 37). Picture There is no picture or the picture is not output correctly. Select the appropriate input (page 21). When there is no picture while the TV input is selected, select the TV channel that you want using the TV remote control. When there is no picture while the HDMI input is selected, press the playback button of the connected device. Disconnect the HDMI cable, then connect it again. Make sure that the cable is firmly inserted. When there is no picture from the connected device or the picture from 32US