Sony HT-X8500 Operating Instructions - Page 29
Using the Various Functions, Using the Control for HDMI Function, Preparing to Use the Control
View all Sony HT-X8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Using the Various Functions manufactured by Sony, the Control for HDMI function of the Sound Bar is also enabled automatically. Using the Control for HDMI Function Connecting a device such as a TV or Bluray Disc player compatible with the Control for HDMI function* using an HDMI cable enables you to easily operate the device by using a TV or Bluray Disc player remote control. Note These functions may work with devices other than those manufactured by Sony, but operation is not guaranteed. * Control for HDMI is a standard used by CEC (Consumer Electronics Control) for allowing HDMI (High-Definition Multimedia Interface) devices to control each other. Preparing to Use the Control for HDMI Function Press and hold VOICE for 5 seconds to set the function to on or off. Control for HDMI function on The HDMI and BLUETOOTH indicators flash. Control for HDMI function off The Dolby ATMOS and DTS:X indicators flash. Enable the Control for HDMI function settings for the following devices after setting the Control for HDMI function of the Sound Bar to on by performing the operation above. • TV or AV device connected to the Sound Bar • AV device connected to the TV Tip If you enable the Control for HDMI ("BRAVIA" sync) function when using a TV System Power Off Function When you turn off the TV, the Sound Bar will turn off automatically. System Audio Control Function If you turn on the Sound Bar while you are watching the TV, the TV sound will be output from the speakers of the Sound Bar. The volume of the Sound Bar can be adjusted using the TV remote control. When you turn on the TV, the Sound Bar is turned on automatically and the TV sound is output from the speakers of the Sound Bar. Operations can also be made by the TV's menu. For details, refer to the operating instructions of your TV. Notes • The number for the Sound Bar's volume level is displayed on the TV screen depending on the TV. • Depending on the settings of the TV, the System Audio Control function may not be available. For details, refer to the operating instructions of your TV. • Depending on the TV, if the TV sound was output from the speakers of the TV the previous time you watched the TV, the Sound Bar may not turn on by interlocking with the TV power even if the TV is turned on. eARC/ARC (Enhanced Audio Return Channel/Audio Return Channel) If the Sound Bar is connected to a TV's HDMI IN jack compatible with eARC or 29US