Sony HT-XT3 Operating Instructions - Page 15
To disconnect the BLUETOOTH, receiver, To delete a registered, BLUETOOTH receiver, BLUETOOTH Function
View all Sony HT-XT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BLUETOOTH Function 2 Set [Bluetooth Mode] to [Transmitter] in [Bluetooth Settings] (page 24). 3 Press / to select [OK]. 4 Press / to select the BLUETOOTH receiver's name from [Device List] in [Bluetooth Settings] (page 25), then press . When the BLUETOOTH connection is established, the blue LED indicator lights up. Note If you cannot find your BLUETOOTH receiver's name in the list, select [Scan]. 5 Start playback the source via this system. The sound is output from the BLUETOOTH receiver. 6 Adjust the volume. Adjust the volume of the BLUETOOTH receiver. When connected to a BLUETOOTH receiver, volume level of the unit cannot be controlled. Volume touch keys on the unit and buttons on the remote control only works for the BLUETOOTH receiver. Note You can register up to 9 BLUETOOTH receivers. If the 10th BLUETOOTH receiver is registered, the least recently connected BLUETOOTH receiver will be replaced by the new one. The system can display up to 15 detected BLUETOOTH receivers in the [Device List]. You cannot change the sound effects or settings in Options menu during sound transmitting. Some contents cannot be output due to content protection. The audio output from the BLUETOOTH receiver may be delayed from that on the system because of the characteristics of the BLUETOOTH wireless technology. No sound is output from system's speakers and HDMI OUT (ARC) jack when BLUETOOTH receiver is successfully connected to the system. [Screen mirroring] input, [Bluetooth Audio] input and Home Theatre Control function are disabled when the system is in transmitter mode. Tip Once the system and BLUETOOTH receiver are connected, you can control playback by using playback operation buttons on the BLUETOOTH receiver. You can connect this system to the most recently connected BLUETOOTH receiver by pressing RX/TX repeatedly to select [Transmitter]. Then, start playback the source on the system. To disconnect the BLUETOOTH receiver Perform any of the following items. Disable the BLUETOOTH function on BLUETOOTH receiver. Set [Bluetooth Mode] to [Receiver] or [Off] (page 24). Turn off the system or the BLUETOOTH receiver. Perform the One-touch function (NFC). To delete a registered BLUETOOTH receiver 1 Select [Device List] in [Bluetooth Settings] (page 25). A list of paired and detected BLUETOOTH receivers appears. 2 Press / to select the device, then press OPTIONS. 3 Press / to select [Remove], then press . 4 Press / to select [OK], then press . 15US