Sony HT-XT3 Operating Instructions - Page 35
Additional Information, Precautions, On safety, On power sources, On heat buildup, On placement
View all Sony HT-XT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Additional Information Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further. Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock. Do not climb on the system, as you may fall down and injure yourself, or system damage may result. Do not place anything other than a TV on the system. On power sources Before operating the system, check that the operating voltage is identical to your local power supply. The operating voltage is indicated on the nameplate at the rear of the system. If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. AC power cord (mains lead) must be changed only at a qualified service shop. On heat buildup Although the system heats up during operation, this is not a malfunction. If you continuously use this system at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. On placement Leave the front of the system open. Do not place the system on top of a device that radiates heat. Place the system in a location with adequate ventilation to prevent heat build-up in the system. Do not place the system on a soft surface (rugs, blankets, etc.) or place anything at the rear of the system that might block the ventilation holes and cause malfunctions. Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. Do not install the system in an inclined position. It is designed to be operated in a horizontal position only. Do not place metal objects in front of the front panel. It may limit reception of radio waves. Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment. If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function. Use caution when placing the system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result. Take care to avoid any possible injury from the corners of the system. Install the system so as not to harm the speaker on the bottom of this system. The speakers of this system are not magnetically shielded. Do not place magnetic cards or a CRTtype TV set on top of the system or near it. 35US