Sony HT-XT3 Operating Instructions - Page 41
Network connection, Wireless LAN connection, use the Wi-Fi Protected Setup
View all Sony HT-XT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
The connected device is compatible with the [Control for HDMI] function. The connected device's setting for the [Control for HDMI] function is correct. If you connect/disconnect the AC power cord (mains lead), wait more than 15 seconds before operating the system. If you connect the audio output of video device with the system, using a cable other than an HDMI cable, no sound may be output because of "BRAVIA" Sync. In such a case, set [Control for HDMI] to [Off] (page 26) or connect the cable from the audio output jack of the video device directly to the TV. The types and number of devices that can be controlled by the "BRAVIA" Sync feature are restricted by the HDMI CEC standard as follows: Recording devices (Blu-ray Disc™ recorders, DVD recorders, etc.): up to 3 devices Playback devices (Blu-ray Disc™ players, DVD players, etc.): up to 3 devices (including this system) Tuner-related devices: up to 4 devices Audio system (receiver/ headphones): up to 1 device (including this system) Network connection The system cannot connect to the network. Check the network connection (page 16) and the network settings (page 27). Wireless LAN connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. Check if the wireless LAN router is on. Check the network connection (page 16) and the network settings (page 27). Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. Devices that use a 2.4 GHz frequency band, such as a microwave, BLUETOOTH, or digital cordless device, may interrupt communication. Move the system away from such devices, or turn off such devices. The wireless LAN connection may be unstable depending on the usage environment, especially while using the BLUETOOTH function of the system. In this case, adjust the usage environment. Additional Information 41US