Sony HXRNX80 Operating Instructions - Page 83

Using Network Functions Using the streaming function (STREAMING) You can connect the camcorder to a network and stream a movie in real-time to external devices. b Note • Camcorder streaming uses MPEG2-TS/UDP transport stream. To view the streamed video and audio, use devices that supports this transport stream format. For details, refer to the instruction manuals of each device. Streaming formats There are limitations on the size of the original file movie and the streaming movie. For details, see "Streaming, RTMP/ RTMPS, and USTREAM supported formats" (p. 153). Configuring streaming (preset registration) You configure streaming settings and register them using PRESET beforehand to distribute a stream using those settings. The following items can be configured. SIZE Select the image size for streaming. - 1280×720 - 640×360 z Tip • Select a size of "640×360" for increased streaming distribution stability. DESTINATION SET Configure the streaming distribution destination. - Host Name: IP address or host name of the receiver - Port: Port number used for streaming on the receiver 1 Configure the basic network settings (p. 77, 82). 2 Press the MENU button. 3 Select (NETWORK SET) t [STREAMING] t desired PRESET number t configuration item. 4 Select/set the setting value. 5 Press the MENU button to return to the shooting screen. Streaming distribution You can distribute a stream of the movie, while shooting, using the connected network. 1 Check that the network connection settings are successful (p. 77, 82). 2 Press the MENU button. 3 Select (NETWORK SET) t [STREAMING] t [EXECUTE] t network connection method. • The network connection starts. Continued , 83