Sony PEG-TH55 Troubleshooting Q&A - Page 13

Troubleshooting The screen is not displayed even though the POWER LED is on (continued) B Perform a soft reset by pressing the RESET button of your CLIÉ handheld. b For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)". My CLIÉ handheld does not respond B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode? Your CLIÉ handheld does not operate when the POWER/HOLD switch is in HOLD mode. Make sure you release HOLD mode. B Is your CLIÉ handheld placed near the IR port of your computer? Move your CLIÉ handheld away from the IR port of your computer except when performing the IR HotSync® operation, as a malfunction may occur. You can also disable the IR feature by selecting [Off] next to [Beam Receive:] in the Preferences screen for [General]. B Perform a soft reset by pressing the RESET button of your CLIÉ handheld. b For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)". My CLIÉ handheld keeps turning itself off B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic power-off). You can set the automatic power-off time by selecting a time for [Auto-off After:] in the Preferences screen for [General]. Note The maximum idle time is 3 minutes. b For details, refer to "Customizing your CLIÉ™ handheld (Preferences): Setting the automatic power-off time" in the "Handbook" (PDF format). Continued on next page 13