Sony PRS 500 Operation Guide - Page 60
Sony Readers memory. Transfer any, Connecting Sony Reader viaUSB
UPC - 027242691438
View all Sony PRS 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Connection to the computer Symptom Cause or corrective action Sony Reader cannot be operated during USB connection. Sony Reader cannot be operated while it is connected to a computer. Sony Reader cannot be recognized. Is the power of Sony Reader turned on? Is the USB cable connected properly? Verify the above and try again. Are you using a USB hub or USB extension cable? Connecting Sony Reader via a USB hub or extension cable may not work and is not supported. Connect the USB cable directly to the computer. Verify that (indicating connection via USB) is displayed at the top of the Sony Reader screen. If Sony Reader still cannot be recognized, disconnect the USB cable from Sony Reader, then reconnect it after a while. If the optional cradle is used, remove Sony Reader from the cradle, then replace it after a while. Content cannot be transferred to Sony Reader from your computer. The USB cable is not connected properly. Disconnect the USB cable, then reconnect it. There is not enough free space on Sony Readers memory. Transfer any unnecessary content back to CONNECT Reader, then delete it to increase free space on Sony Reader. Continued 60