Sony RDR-GX360 Operating Instructions - Page 36

Button Operation Disc (fast reverse/fast forward) Fast reverses or fast forwards the disc when pressed during playback. Search speed changes with each press: fast reverse FR1 T FR2*2 T T FR3*3 T T T fast forward t FF1*1 t t FF2*2 t t t FF3*3 All discs *1 FF1 with sound (Scan Audio) is available for DVDs with Dolby Digital soundtracks. *2 FR2 and FF2 are not available for MP3. *3 FR3 and FF3 are only available for DVDs and VIDEO CDs. (slow) Plays in slow motion when pressed in pause mode. Playback speed changes with each press: reverse slow motion T T T T T T forward slow motion t t t t t t +RW +R DVD -RWVR -RWVideo -RVR -RVideo RAM VCD * * Playback direction only X PAUSE Pauses playback. If you pause playback for more than five minutes, playback starts automatically. To resume normal playback after playing at various speeds, press H PLAY. All discs z Hints • You can change playback options, such as subtitle, audio track, angle, etc., using the OPTIONS menu (page 11). • During playback or pause mode, you can also use the ./> buttons on the recorder as the remote's m/ M buttons. Hold the buttons down during playback to fast reverse or fast forward. In pause mode, you can play in slow motion. Three speeds are available, depending on the duration of the press. • See "DVD Audio/Subtitle Language" on page 100 for the meaning of the language abbreviation. Notes • If you pause playback of a CD, or DATA CD/DATA DVD containing MP3 audio tracks, playback will not start until you press H PLAY or X PAUSE. • Sound will be interrupted during Scan Audio (page 37). Notes on playing DTS soundtracks on a CD When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the recorder are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the recorder. Notes on playing DVDs with a DTS soundtrack DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack. When you play a DVD with DTS soundtracks, set "Digital Out" - "DTS" to "On" of "Audio" in the "Setup" display (page 82). If you connect the recorder to audio equipment without a DTS decoder, do not set "DTS" to "On" in "Audio" setup. A loud noise (or no sound) may come out from the speakers, which might disturb your ears or cause damage to the speakers. 36US