Sony RDR-GX360 Operating Instructions - Page 83
Downmix DVDs only, Audio DRC Dynamic Range Control DVDs, Audio HDMI DVD VIDEOs only, Scan Audio DVDs
UPC - 027242735507
View all Sony RDR-GX360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Downmix (DVDs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "A Connecting to audio L/R jacks" on page 19. This function affects the output of the following jacks: - LINE OUT (AUDIO L/R) jacks - AUDIO OUT L/R jacks - DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack when "Dolby Digital" is set to "DPCM" (page 82). Dolby Surround Normally select this position. Multi-channel audio signals are output to two channels for enjoying surround sounds. Normal Multi-channel audio signals are downmixed to two channels for use with your stereo. To enjoy the surround effect of Dolby Digital, turn off the surround settings of this recorder (page 83). Audio DRC (Dynamic Range Control) (DVDs only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC." This affects the output from the following jacks: - LINE OUT (AUDIO L/R) jacks - AUDIO OUT L/R jacks - DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack only when "Dolby Digital" is set to "D-PCM" (page 82). Standard Normally select this position. TV Mode Makes low sounds clear even if you turn the volume down. Wide Range Gives you the feeling of being at a live performance. Audio (HDMI) (DVD VIDEOs only) Selects the output method from the HDMI OUT jack. Auto Normally, select this. Outputs audio signals according to the "Dolby Digital" or "DTS" settings (page 82). PCM Converts Dolby Digital to PCM. Note If you select "Auto" when connecting the recorder to a TV not compatible with Dolby Digital or DTS, no sound may be heard. In this case, select "PCM." Scan Audio (DVDs only) On Outputs audio signals during FF1 fast-forward of a DVD disc with Dolby Digital soundtracks. Off No sound is output during FF1 fast-forward. Note Sound will be interrupted during Scan Audio. Surround Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front speakers (page 19). Off No surround effect Surround1 Creates one set of virtual surround speakers Surround2 Creates two sets of virtual surround speakers Surround3 Creates three sets of virtual surround speakers Notes • When the playback signal does not contain a signal for the surround speakers, the surround effects will be difficult to hear. • When you select one of the surround modes, turn off the surround settings of the connected TV or amplifier (receiver). Settings and Adjustments ,continued 83US