Sony RM-BR300 Operating Instructions - Page 14

Connections and Operations Storing the Camera Settings in Memory - Presetting Feature Up to sixteen combinations of settings (sixteen positions), including camera position, zooming, focusing, and backlighting, can be stored in the memory of the camera using this unit. RESET 5 1 VALUE LOCK - + R BRIGHT MODE - + B FOCUS AUTO AUTO MANUAL NEAR FAR ONE PUSH AF RESET PRESET SHIFT L/R DIRECTION POWER PANEL LIGHT BLACK PAN-TILT ONE PUSH LIGHT RESET AWB MENU POSITION 12345678 9 10 11 12 13 14 15 16 STD REV CAMERA 1234567 4 2 1 Press the PAN-TILT RESET button to reset the pan/ tilt position. 2 Press the CAMERA button to select the camera whose settings you want to preset. 3 Adjust the position, zooming, focusing and backlighting of the camera. 4 Press the SHIFT button for more than one second to select the function of POSITION 1 to 8 buttons, if necessary (except the BRC-H700 and BRC-Z700). To store in positions 1 to 8, press the SHIFT button so that the upper indicator lights. The POSITION 1 to 8 buttons can be used for positions 1 to 8. To store in positions 9 to 16, press the SHIFT button so that the lower indicator lights. The POSITION 1 to 8 buttons can be used for positions 9 to 16. SHIFT for positions 1 to 8 for positions 9 to 16 5 While holding down the PRESET button, press any of the POSITION buttons, 1 to 8, in which you want to store the settings (except the BRC-H700 and BRC-Z700). Press a POSITION button. RESET PRESET 12345678 9 10 11 12 13 14 15 16 While holding down The settings are stored in the memory of the camera. The pressed button flashes during storing. Flashing stops when storing is completed. To recall the stored settings Select the function of the POSITION 1 to 8 buttons by pressing the SHIFT button for more than one second, if necessary. Press any of the POSITION buttons, 1 to 8, in which you have stored the settings. To cancel the preset memory Select the function of the POSITION 1 to 8 buttons using the SHIFT button, if necessary. While holding down the RESET button, press the POSITION button from which you want to cancel the settings. While holding down Press a POSITION button. RESET PRESET 12345678 9 10 11 12 13 14 15 16 The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled. Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. To select positions 9 to 16 for the BRCH700 or BRC-Z700 While holding down the SHIFT button, press the PRESET button (to store or recall the settings) or the RESET button (when canceling the settings). The lower indicator will light and the POSITION 1 to 8 buttons can be used for positions 9 to 16. When you release the SHIFT button, the upper indicator lights and the POSITION 1 to 8 buttons can be used for positions 1 to 8. For the BRC-H700 or BRC-Z700, you need not press the SHIFT button for more than one second to switch the indicator in advance. 14 GB Storing the Camera Settings in Memory - Presetting Feature