Sony RM-BR300 Operating Instructions - Page 16

Appendix, Troubleshooting - problems

Get Sony RM-BR300 - Remote Control Unit PDF manuals and user guides View all Sony RM-BR300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Appendix Troubleshooting Before bringing in your unit for service, check the following as a guide to troubleshoot the problem. If the problem cannot be corrected, consult with your Sony dealer. Symptom Cause Remedy The power of the unit is not turned on. The AC power adaptor is not connected to the Insert the power cord firmly as far as it will DC IN 12V jack firmly. go. The AC power cord is not inserted firmly into Insert the power cord firmly as far as it will the AC power adaptor or the AC outlet. go. The camera cannot be operated with the The connection using the VISCA RS-422 unit. connectors is not correctly made. Check that the connection to the VISCA RS422 connectors is correctly made, and the RS422 cable is properly connected. VISCA control setting is not correct. Select the proper setting (RS-232C or RS422) with the DIP switch on the unit (page 8). The communication baud rate setting of the camera and the unit differ. Select the communication baud rate, 9,600 bps or 38,400 bps, with the DIP switch on the unit (page 8) which is selected on the camera. The unit cannot be operated at all. Pull out the plug of the power cord from the - AC outlet, then reinsert it into the AC outlet after a while. Appendix 16 GB Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Appendix
Troubleshooting
GB
16
Appendix
Troubleshooting
Before bringing in your unit for service, check the
following as a guide to troubleshoot the problem. If the
problem cannot be corrected, consult with your Sony
dealer.
Symptom
Cause
Remedy
The power of the unit is not turned on.
The AC power adaptor is not connected to the
DC IN 12V jack firmly.
Insert the power cord firmly as far as it will
go.
The AC power cord is not inserted firmly into
the AC power adaptor or the AC outlet.
Insert the power cord firmly as far as it will
go.
The camera cannot be operated with the
unit.
The connection using the VISCA RS-422
connectors is not correctly made.
Check that the connection to the VISCA RS-
422 connectors is correctly made, and the RS-
422 cable is properly connected.
VISCA control setting is not correct.
Select the proper setting (RS-232C or RS-
422) with the DIP switch on the unit (page 8).
The communication baud rate setting of the
camera and the unit differ.
Select the communication baud rate, 9,600
bps or 38,400 bps, with the DIP switch on the
unit (page 8) which is selected on the camera.
The unit cannot be operated at all.
—
Pull out the plug of the power cord from the
AC outlet, then reinsert it into the AC outlet
after a while.