Sony STR-DG800 Operating Instructions - Page 94
unbalanced or reversed., The left and right sounds are
UPC - 027242683075
View all Sony STR-DG800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
There is no sound from one of the front speakers. • Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones. If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound. • Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied). There is no sound from analog 2 channel sources. • Check that the INPUT MODE is not set to "COAX FIXED" or "OPT FIXED" for the selected input (page 78). • Check that the MULTI CH IN function is not selected. There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is not set to "ANALOG FIXED" (page 78). Check that the INPUT MODE is not set to "COAX FIXED" for the sources from the OPTICAL input jack, or to "OPT FIXED" for the sources from the COAXIAL input jack. • Check that the MULTI CH IN function is not selected. The source sound input from the HDMI jack on the receiver is not output from the TV speaker. • Check the HDMI connection. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with the each component. The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the balance parameters using the LEVEL menu. There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light. • Move your audio components away from the TV. • Make sure you have grounded the U SIGNAL GND terminal (only when a turntable is connected). • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from the center/ surround/surround back speakers. • Select a CINEMA STUDIO EX mode (page 64). • Adjust the speaker level (page 39). • Make sure the center/surround speakers are set to either "CTR SP/SUR SP SMALL" or "CTR SP/SUR SP LARGE" (page 49). • Make sure the surround back speaker is set to "SB SP SINGLE" or "SB SP DUAL" (page 49). 94US