Sony STR-DH770 Help Guide Printable PDF - Page 42

4 Perform pairing on the BLUETOOTH device to detect this receiver. For details, refer to the operating instructions of your BLUETOOTH device. A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DH770]. 5 Select [STR-DH770] on the BLUETOOTH device display. If [STR-DH770] is not displayed, repeat this process from step 1. 6 Check that the connection is completed and [BT] lights up on the display panel. 7 Start playback on the BLUETOOTH device. 8 Adjust the volume. Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level of the receiver. Canceling pairing operation Press and hold CONNECTION PAIRING BLUETOOTH on the receiver after step 3. Note You can also use INPUT SELECTOR on the receiver to select the BLUETOOTH function in step 2. If the BLUETOOTH device does not support the AVRCP profile, you cannot perform playback or other operations on the receiver. If a passkey is required on the display of the BLUETOOTH device in step 6, enter [0000]. The passkey may be called "Passcode," "PIN code," "PIN number" or "Password." You can pair up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is paired, the least recently connected device will be replaced by the new one. Hint You can also activate the pairing mode of the receiver by pressing and holding CONNECTION PAIRING BLUETOOTH on the receiver. On some types of BLUETOOTH devices, you can adjust the volume using the controls of the BLUETOOTH device. [48] Enjoying Video and Sound Playing content from an iPhone/iPod Compatible iPhone/iPod models You can use the following iPhone/iPod models on this receiver. Update your iPhone/iPod with the latest software before using it. BLUETOOTH technology works with iPhone: iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5 iPod touch: iPod touch (5th and 6th generation)