Sony STR-DH770 Help Guide Printable PDF - Page 75

4 Select the setting you want. AUTO: Gives priority to digital audio signals. If there are more than one digital connection, HDMI audio signals have priority. If there is no digital audio signals, analog audio signals are selected. When TV input is selected, priority is given to Audio Return Channel (ARC) signals. If your TV is not compatible with the ARC function, digital optical audio signals are selected. OPT: Specifies input of digital audio signals to the OPTICAL IN jack. COAX: Specifies input of digital audio signals to the COAXIAL IN jack. ANALOG: Specifies input of analog audio signals to the AUDIO IN (L/R) jacks. Note Depending on the input, [INPUT MODE] may be dimmed on the display panel and other modes cannot be selected. Hint You can also use INPUT SELECTOR on the receiver to select the input in step 1. [105] Adjusting Settings Input Settings Changing the name for each input (NAME IN) You can enter up to 8 characters for each input name. This operation is only available using the display panel on the front of the receiver. 1 Select the input name you want to change. 2 Press AMP MENU. 3 Select [] - [NAME IN] on the display panel. 4 Press / repeatedly to select a character, then press . You can move the input position backward and forward by pressing / . 5 Repeat step 4 to input characters one by one, then press . The name you entered is registered. [106] Adjusting Settings Input Settings Using other audio input jacks (A. ASSIGN) You can reassign the OPTICAL/COAXIAL digital audio input jacks to other input if the default settings of the jacks do not correspond to your connected equipment. E.g. When connecting a DVD player to the OPTICAL TV IN jack, assign the OPTICAL TV IN