Sony STR-DH770 Help Guide Printable PDF - Page 74
Selecting the unit of measurement DIST. UNIT, Switching between digital and analog audio INPUT
View all Sony STR-DH770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
frequency. 4 Set the crossover frequency. Note [Crossover Freq] cannot be set when headphones are connected. [Crossover Freq] for the particular speaker cannot be set if [Size] is set to [Large] in the [Speaker Setting] menu. The surround back speakers will be set to the same setting as that of the surround speakers. Hint You can also set the crossover frequency of speakers from the [] menu on the display panel. [103] Adjusting Settings Speaker Settings Selecting the unit of measurement (DIST. UNIT) You can select the unit of measurement for setting distances. This operation is only available using the display panel on the front of the receiver. 1 Press AMP MENU. 2 Select [] - [DIST. UNIT] on the display panel. 3 Select the setting you want. METER: The distance is displayed in meters. FEET: The distance is displayed in feet. [104] Adjusting Settings Input Settings Switching between digital and analog audio (INPUT MODE) When you connect devices to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either device, or switch from one to the other, depending on the type of material you intend to watch. This operation is only available using the display panel on the front of the receiver. 1 Press the input buttons to select the input. 2 Press AMP MENU. 3 Select [] - [INPUT MODE] on the display panel.