Sony STR-DH770 Help Guide Printable PDF - Page 85
Turning the BLUETOOTH function on/off BT POWER, Setting standby mode AUTO STBY
View all Sony STR-DH770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
1 Press AMP MENU. 2 Select [] - [BT AAC] on the display panel. 3 Select [AAC ON] or [AAC OFF]. AAC ON: AAC audio is available if the BLUETOOTH device supports AAC. AAC OFF: AAC audio is not available. Note When you change this setting, the setting is applied from the next time you connect the BLUETOOTH device. Hint You can enjoy high-quality sound if AAC is enabled. [124] Adjusting Settings Bluetooth Settings Turning the BLUETOOTH function on/off (BT POWER) You can turn the BLUETOOTH function on or off. The NFC function is also turned on/off in conjunction with this setting. This operation is only available using the display panel on the front of the receiver. 1 Press AMP MENU. 2 Select [] - [BT POWER] on the display panel. 3 Select [BT ON] or [BT OFF]. Note You cannot set this function when [BT] (BLUETOOTH device) is selected as the input. ([BT POWER] on the display panel will become dimmed.) [125] Adjusting Settings System Settings Setting standby mode (AUTO STBY) You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when no signals are input to the receiver. This operation is only available using the display panel on the front of the receiver. 1 Press AMP MENU. 2 Select [] - [AUTO STBY] on the display panel.