Sony WHG-SLK1i Operating Instructions - Page 45
To select a transition effect for image, files in the slideshow, To specify the slideshow speed
View all Sony WHG-SLK1i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Disc To specify the slideshow speed (JPEG image files only) 1 Press DISPLAY during slideshow. The Control Menu appears. If "INTERVAL" is not displayed on the Control Menu, press DISPLAY repeatedly until "INTERVAL" appears. 2 Press or repeatedly to select (INTERVAL), then press ENTER. The options for "INTERVAL" appear. 3 Press or repeatedly to select the desired transition interval. The default setting is underlined. NORMAL: Sets to the standard duration. FAST: Sets the duration shorter than "NORMAL." SLOW 1: Sets the duration longer than "NORMAL." SLOW 2: Sets the duration longer than "SLOW 1." 4 Press ENTER. The selected setting takes effect. Note Some JPEG image files (especially progressive JPEG image files or JPEG image files with 3,000,000 pixels or more) may take a longer time to display than others, which may make the transitions seem longer than that of the option you selected. To select a transition effect for image files in the slideshow (JPEG image files only) 1 Press DISPLAY during slideshow. The Control Menu appears. If "EFFECT" is not displayed on the Control Menu, press DISPLAY repeatedly until "EFFECT" appears. 2 Press or repeatedly to select (EFFECT), then press ENTER. The options for "EFFECT" appear. 3 Press or repeatedly to select the desired setting. The default setting is underlined. MODE 1: The image sweeps in from top to bottom of the screen. MODE 2: The image sweeps in from left to right of the screen. MODE 3: The image stretches out from the center of the screen. MODE 4: The image randomly cycles through the effects. MODE 5: The next image slides over the current image. OFF: turns off this function. 4 Press ENTER. The selected setting takes effect. Continued 45GB