Stihl RE 110 PLUS Instruction Manual - Page 29
After Finishing Work
View all Stihl RE 110 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
13 After Finishing Work 13 After Finishing Work English ► Rotate the fan-jet nozzle in the (+) direction to increase the working pressure. ► Rotate the fan-jet nozzle in the (-) direction to reduce the working pressure. To clean: ► Before starting work, direct the water jet at an inconspicuous area of the surface and check that the surface is not damaged. ► Work at a distance that allows you to effectively clean the surface without damaging it. ► Adjust the fan-jet nozzle and distance from the surface to be cleaned to ensure the surface will not be damaged by the spray. 0000-GXX-4628-A0 13.1 Preparing for Transportation or Storage To prepare the pressure washer for transportation or storage: ► Switch off the pressure washer, @ 11.2. ► Disconnect the pressure washer from the power supply. ► Disconnect the pressure washer from the water supply. ► Press the spray gun trigger to relieve any remaining pressure in the system. ► Lock the spray gun trigger. ► Disconnect the water hose. ► Remove and clean the nozzle and spray lance. ► Remove the spray gun and let the rest of the water run out of the spray gun. ► If the pressure washer will be exposed to freezing temperatures, protect it with antifreeze or take other measures outlined below, @ 13.2. ► Clean the pressure washer. 0000-GXX-B522-A0 ► Insert the detergent spray set (1). ► Move the spray attachment evenly along the surface to be cleaned. ► Move forward slowly in a controlled manner. 0458-620-8621-A 0000-GXX-5094-A0 1 27