Stihl RE 110 PLUS Instruction Manual - Page 32
Storing, Cleaning
View all Stihl RE 110 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English ► When transporting the pressure washer in a vehicle, ensure that the pressure washer is standing upright, lying on its back, secured with lashing straps, belts or a net and cannot topple over or move. 15 Storing 15.1 Storing the Pressure Washer WARNING Store the pressure washer indoors in a dry, secure place that is inaccessible to children and other unauthorized users, @ 5.5. Improper storage can result in unauthorized use and damage to the pressure washer, @ 5.5. When storing the pressure washer for three months or longer: ► Clean the pressure washer, @ 16.1. ► Store the pressure washer indoors in a dry and secure location, out of the reach of children and other unauthorized persons. ► If the pressure washer cannot be stored in a room where it is protected from freezing temperatures, protect the pressure washer as outlined above, @ 13.2. NOTICE Freezing temperatures can damage components of the pressure washer. STIHL recommends storing the pressure washer indoors in a dry room where it is protected from freezing temperatures. Relieve all system pressure and make sure all water is eliminated from the pump system and hoses before storing. 16 Cleaning 15 Storing 16.1 Cleaning the Pressure Washer WARNING Before carrying out any of the cleaning work specified in this chapter @ 6, take certain measures to reduce the risk of personal injury from unintended activation: switch off the pressure washer and disconnect the unit from the power supply. Relieve all system pressure by pulling the trigger switch and lock the spray gun trigger. To clean the pressure washer: ► Clean the pressure washer's polymer components, couplings and connectors with a slightly dampened cloth. Do not use abrasives or solvents that may damage the pressure washer's polymer components. ► Do not use a pressure washer to clean the unit or spray it with water or other liquids. 16.2 Cleaning the Nozzle and Spray Lance A clogged high pressure nozzle can cause excessive pressure to build in the pump. Clean the high-pressure nozzle if it becomes clogged. To clean the nozzle and spray lance: 0000-GXX-4369-A0 ► Rinse the nozzle and spray lance under running water and dry them with a cloth. 30 0458-620-8621-A