Symantec 10521146 User Guide - Page 14
Matching port groups to in-line pairs, Warning
UPC - 037648268134
View all Symantec 10521146 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 In-line Bypass unit features Figure 1-4 Connected port group Network 2 In-line Bypass unit 7120 appliance Network Port group 0 Port group 1 0 - Port 0 (eth0) 1 - Port 1 (eth1) 2 - Port 2 (eth2) 3 - Port 3 (eth3) 2/3 - In-line pair 1 4 - Net A 5 - App A 6 - App B 7 - Net B Matching port groups to in-line pairs Each port group has a designated in-line pair on the 7100 Series. Warning: Connect each port group to the specified in-line pair. Connecting a port group to a different in-line pair is not supported. Note: Do not connect the bypass unit to 7100 Series interfaces that are configured in passive mode, or are part of an interface group.
14
In-line Bypass unit features
Figure 1-4
Connected port group
Matching port groups to in-line pairs
Each port group has a designated in-line pair on the 7100 Series.
Warning:
Connect each port group to the specified in-line pair. Connecting a port
group to a different in-line pair is not supported.
Note:
Do not connect the bypass unit to 7100 Series interfaces that are
configured in passive mode, or are part of an interface group.
0 - Port 0 (eth0)
1 - Port 1 (eth1)
2 - Port 2 (eth2)
3 - Port 3 (eth3)
2/3 - In-line pair 1
4 - Net A
5 - App A
6 - App B
7 - Net B
Network
Network
2 In-line Bypass unit
7120 appliance
Port group 1
Port group 0