Symphonic 6480 Owner's Manual - Page 26
Touch, Recording, Monitoring, Recording
View all Symphonic 6480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
OTR (ONE TOUCH RECORDING) The One Touch Recording function enables you to record a program simply by pressing OTR button on the VCR. According to the table, simply press OTR button as many times as needed to set the desired recording length. The channel number to be recorded and recording length will be shown on the display. 1 Turn on the VCR and 1'V. And set the TV channel to the same video output channel. 0:19:21 32 2 Set the VCR to the channel to be recorded. 3 Press OTR button. Recording starts immediately when the OTR button is pressed, whether if you are watching the same or a different channel. The recording length will be determined by the number of times you press OTR button. 3E/STILL RECtOTR O -zn pot I ..jU 32 PUSH(ES) 1 push 2 pushes 3 pushes 4 pushes 5 pushes 6 pushes 7 pushes 8 pushes 9 pushes 10 pushes 11 pushes 12 pushes 13 pushes 14 pushes 15 pushes 16 pushes 17 pushes 18 pushes DISPLAY LENGTH Normal Rec Mode 0:30 30 minutes 1:00 60 minutes 1:30 90 minutes 2:00 120 minutes 2:30 150 minutes 3:00 180 minutes 3:30 210 minutes 4:00 240 minutes 4:30 270 minutes 5:00 300 minutes 5:30 330 minutes 6:00 360 minutes 6:30 390 minutes 7:00 420 minutes 7:30 450 minutes 8:00 480 minutes Normal Rec Mode • Each time you press OTR button, you will extend the recording time by 30 minutes at a time up to 8-hours (or to the end of the tape). • When OTR button is pressed 18 times, the VCR will record continuously until the end of the tape is reached. • To stop the OTR operation, press STOP button. • The recording length time remaining is indicated on the display as the recording is started. • Recording stops when 0:00 is reached. • Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). • The TV that is connected to your VCR may be turned on or off during OTR recording. MONITORING RECORDING Turn on the TV and set the TV channel to the same VCR video output channel located on the back of the VCR. (CH3 or 4). T Press TVNCR button on remote control unit so that "VCR" appears on the display. NOTE: The VCR will continue recording until the preset end time is reached or the tape runs out. - 26 - EN