Symphonic RSMGTD204 Owner's Manual - Page 11

46. ANT. in Jack Connect to an antenna, cable system or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out Jack Connect to the digital input of an external amplifier or (decoder for DVD audio only). PREPARATION FOR USE ANTENNA/CABLE CONNECTION Satellite Box or Cable Box (Not supplied) VHF/UHF Antenna (Not supplied) OUT IN From Cable System or Satellite Dish VHF Antenna (Not supplied) 75-ohm From Cable Coaxial System Cable (Not sup- plied) ANT. 75-ohm Coaxial or Cable (Not supplied) AUDIO OUT COAXIAL 1 or ANT. or UHF Antenna (Not supplied) VHF/UHF Combiner (Not supplied) [Fig. 4] Flat twin-lead cable VHF/UHF SEPARATE ANTENNAS In some areas it will be necessary to use an outdoor antenna. CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX Use this connection if your cable system connects directly to your TV/VCR/DVD without a converter box. By using this connection you can: 1) Use the TV/VCR/DVD remote control to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This TV/VCR/DVD will ONLY record and view the same channel. CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR/DVD remote control. Unattended timer recording is limited to one channel at a time. Antenna/Cable Connections Continued on the Next Page. - 11 - EN 1C29