Symphonic RSMGTD204 Owner's Manual - Page 16

5 Select the year Press the Arrow button K or L until your desired year appears. (Example: 2004) Then press the Arrow button B. 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B. 7 Select the minute Press the Arrow button K or L until the desired minute appears. (Example: 40) - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE -- : -- -- - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE 0 5 : - - PM - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE 0 5 : 4 0 PM 8 Start the clock Press the SETUP button on the 5:40 PM remote control. Although seconds are not dis- played, they begin counting from 00 when you press the SETUP but- ton on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps [1] to [2]. 2)Select where you want to change using the Arrow button B. 3)Enter correct numbers using the Arrow button K or L. 4)Press the SETUP button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock. AUTOMATIC CLOCK SETTING Make sure ... • The TV/VCR/DVD is turned on. • Confirm the TV/VCR/DVD is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR/DVD. NOTE: • If a cable converter box is being used, make sure it is powered on. • You must use the TV/VCR/DVD remote control to perform the clock setting procedure. • If the TV/VCR/DVD is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the TV/VCR/DVD must be set to the output chan- nel of the cable converter box or satellite box (usu- ally channel 3 or 4), to be able to set up or correct the clock automatically. 1 Select "SETTING CLOCK" Press the SETUP button on the remote control. Press the Arrow button K or L to select "SETTING CLOCK". Press the ENTER button to enter "SETTING CLOCK" menu. - TV/VCR SETUP - TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Set "AUTO CLOCK" to [ON] Press the Arrow button B until "AUTO CLOCK [ON]" appears. - SETTING CLOCK - B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] 3 Begin "AUTO CLOCK CH SEARCH" Press the Arrow button L to select "AUTO CLOCK CH SEARCH". Press the ENTER button. • The TV/VCR/DVD is now searching for the station which - SETTING CLOCK - AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel. • "_ _" appears at the lower left of the screen when the search has ended. - AUTO CLOCK CH SEARCH - 08 10 13 • Auto Clock station- write down the number(s) that appear on the _ _ screen. These are the auto clock station(s) in your area. See step [4] on page 17. • If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 15. Press the SETUP button to exit the screen. - 16 - EN 1C29