Symphonic RSMGTD204 Owner's Manual - Page 14
Connecting To A Dolby Digital Decoder For Dvd
View all Symphonic RSMGTD204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections. Center speaker Front speaker Front speaker ANT. AUDIO OUT COAXIAL (left) (right) Dolby Digital decoder Surround speaker (left) To COAXIAL DIGITAL AUDIO INPUT jack Surround speaker (right) Subwoofer To DIGITAL AUDIO OUT COAXIAL jack [Fig. 7] NOTES: • Be sure to turn off the power to all components in the system before connecting another component. • Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD. • If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.) • Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/VCR/DVD using incorrect settings may generate noise distortion and may also damage the speakers. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. - 14 - EN 1C29