Symphonic RSMGTD204 Owner's Manual - Page 19

TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV/VCR 1 Turn on the TV/VCR/DVD Press the POWER button to turn on the TV/VCR/DVD. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡You must precede single-digit channel numbers with a zero (for example: 02, 03, 04 and so on). ¡When selecting cable channels which are higher than 99, press +100 first, then press the last two digits. (Example: to select channel 125, first press "+100" then press "2" and "5".) Remember: If the TV/VCR/DVD is connected to a cable box or satellite box, the TV/VCR/DVD must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 3 Adjust sound Press the VOLUME button X or Y to adjust the volume. VOLUME 20 C C C C C CCCCCCC NOTES: • If you press the CHANNEL button K or L in the DVD mode, you can change the TV channels. Even if you turn off the TV/VCR/DVD in the DVD mode, when you turn it on again, it will go into the TV/VCR mode. TV/VCR The TV/VCR/DVD's picture controls - BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS - are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image. NOTES: • Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. • When setting the Picture Control, the Game mode will be cancelled. Make sure ... • TV/VCR/DVD power must be turned on. 1 Select "PICTURE CONTROL" Press the PICTURE button on the remote control. 2 Select item you want to adjust Press the Arrow button K or L until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT - PPPPPPPCPPPPPPP+ 3 Adjust the picture control Press the Arrow button s or B to adjust to your desired level. Arrow Button { Arrow Button B BRIGHT to decrease brightness to increase brightness DEGAUSSING TV/VCR Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so. CONTRAST COLOR TINT SHAPNESS to decrease contrast to pale to purple to soft to increase contrast to brilliant to green to clear • If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this fea- ture. - 19 - EN 1C29