TEAC CD-9010 SYSTEM Owners Manual - Page 11

2 - Names and Functions of Parts Home Screen The following information is shown on the display of the unit. Home Screen with audio CD Home Screen with data CD 1 Playback level meters These show the playback level. Depending to the SYSTEM menu MON MIX item setting, only one level bar will be shown and the indicator on the left end will change from LR to 3M, 6M, L, or R. (See "Mono mix setting" on page 30.) Even when set to ST, if a mono WAV file is played back, the display will change to M and a single level bar will be shown. If you switch the SYSTEM menu METER TYPE item to VU from PEAK, the display will change to a VU-type meter display. (See "Setting the level meter display type" on page 31.) 2 Index This shows the currently playing or selected index number (audio CD only). 3 Track time display (main area) This shows the time of the current track. The contents depend on the playback media. Media Contents shown Audio CD Minutes, seconds, frames Data CD Hours, minutes, seconds, frames Pressing the TIME DISPLAY button switches between elapsed time display and remaining time display. A "-" appears before the remaining time when shown. When an EOM tally signal is being output, the ":" blinks. (See "EOM functions" on page 22) 4 Playback mode Shows the current playback mode. Indicator CONTINUE SINGLE PROGRAM Meaning Continuous playback mode Single playback mode Program playback mode 5 Track number Shows the current track number. 6 Track playback position Shows the current playback position as a bar. As playback proceeds, the bar extends from the left. 7 Repeat playback function indicator This shows the ON/OFF status of the repeat playback function. Indicator No indicator REPEAT REPEAT A- REPEAT A-B Meaning Repeat playback function is OFF Repeat playback function is ON A-B repeat playback function starting point set A-B repeat playback function is ON NOTE The A-B repeat playback function will only be displayed if selected using a TASCAM RC-9010/RC-9010S remote controller (sold separately). 8 PITCH indicator The PITCH ON indicator appears if the pitch control function is on. 9 Master clock indicator This shows the current master clock. Indicator INT EXT EXT NO CLK EXT UNLOCK EXT (blinking) 44.1K 48K Meaning Unit's internal clock in use Synchronized with the word clock input through the WORD SYNC IN connector No signal input through the WORD SYNC IN connector WORD SYNC IN connector input signal unlocked Synchronization with word clock input through the WORD SYNC IN connector possible (after playback completes, the unit will automatically resynchronize with the word clock) Master clock frequency is 44.1 kHz Master clock frequency is 48 kHz 0 Information area CD-TEXT will be shown if available. File names will be shown when using data CDs. When the playback mode is set to PROGRAM, information for the next program item is shown. q Track time display (sub area) The time of the current track is shown. When the main display area shows the elapsed time, this shows the remaining time, and vice versa. A "-" appears before the remaining time when shown. TASCAM CD-9010 11