TEAC CD-9010 SYSTEM Owners Manual - Page 31
Fail safe function setting, Setting the level meter display type, Monitoring point setting
View all TEAC CD-9010 SYSTEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
7 - Other settings and information display Fail safe function setting The fail safe function prevents the accidental operation of buttons. Different buttons are disabled during playback and online playback. See the table below for details 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select FAIL SAFE. Setting the level meter display type You can change the type of the playback level meters on the Home Screen. 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select METER TYPE. 4. Press the DATA dial to move the cursor (selected area) right to select the setting. 5. Turn the DATA dial to set the fail safe function. Options: LOW LIM (default value), UP LIM, OFF 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The fail safe setting is retained even when the power is turned OFF. Buttons disabled according to fail safe setting Fail safe setting LOW LIM UP LIM OFF Disabled buttons during playback standby None BROWSE button --MENU button ENTER button OPEN/CLOSE button --TRACK .// buttons SEARCH m/, buttons --None Disabled buttons during online playback BROWSE button PLAY MODE button MENU button ENTER button OPEN/CLOSE button TRACK .// buttons SEARCH m/, buttons MONITOR button BROWSE button PLAY MODE button MENU button ENTER button OPEN/CLOSE button STANDBY button TRACK .// buttons SEARCH m/, buttons MONITOR button None 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the type of level meters shown. •• PEAK: Peak meters shown •• VU (default value): VU meters shown. 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The level meter type setting is retained even when the power is turned OFF. Monitoring point setting You can set whether the monitoring output signal is from before or after the Online fader. 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select MONITORING POINT. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the monitoring point. •• PreFader (default value): Monitor the signal before the Online fader •• PstFader: Monitor the signal after the Online fader 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The monitoring point setting is retained even when the power is turned OFF. Muting monitoring when online You can set whether or not monitoring output is automatically muted during online playback. 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select MON MUTE ONLINE. TASCAM CD-9010 31