TEAC CD-9010 SYSTEM Owners Manual - Page 30

7 - Other settings and information display Setting the master word clock You can set the source to use for word synchronization. 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select CLOCK MASTER. Mono mix setting You can set the mono mix output for when the STEREO/MONO button is used to set the output to mono. The setting state is shown to the left of the level meters. 1. Press the MENU button to open the MENU screen. 2. Open the SYSTEM menu. 3. Select MONO MIX. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the master word clock. •• INT (default value): Use the unit's internal clock •• EXT: Synchronize with the word clock input through the WORD SYNC IN connector •• 44.1K FIX: Regardless of the file sampling frequency, digital audio is always output at 44.1k FS. 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE •• The master clock setting is retained even when the power is turned OFF. •• Depending on the combination of master clock and playback file sampling frequency settings, the digital output sampling frequency will differ. (See "Master clock and digital output combinations" below.) 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the mono mix. -6dB L+R -3dB L+R L Mono R Mono OFF (default value) The left and right channels of the stereo audio track are each attenuated by -6 dB, summed and then output. The left and right channels of the stereo audio track are each attenuated by -3 dB, summed and then output. The left channel of the stereo audio track is output from both L and R outputs. The right channel of the stereo audio track is output from both L and R outputs. The mono mix function is OFF. 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The mono mix setting is retained even when the power is turned OFF. Master clock and digital output combinations Depending on the combination of the master clock setting and the playback file sampling frequency, the digital output sampling frequency varies. This table shows the combinations. Master clock Internal External (44.1kHz) External (48kHz) Master clock setting Playback file sampling frequency SRC (automatic) Digital output sampling frequency Notes INT 44.1 kHz OFF 44.1 kHz The whole system uses 44.1kHz internal clock 44.1kHz FIX 44.1 kHz OFF 44.1 kHz Digital output is always 44.1 kHz 44.1kHz FIX 48 kHz ON 44.1 kHz Digital output is always 44.1 kHz INT 48 kHz OFF 48 kHz The whole system uses 48kHz internal clock EXT 44.1 kHz OFF 44.1 kHz The whole system uses 44.1kHz external clock EXT 44.1 kHz EXT 48 kHz ON 48 kHz OFF 48 kHz While syncing to 48kHz external clock, the system uses 44.1kHz internal clock The whole system uses 48kHz external clock NOTE •• The sampling rate converter (SRC) function is turned ON and OFF automatically. •• If the clock is interrupted when synchronized with a 48kHz external clock, the unit will switch to internal clock, the sampling rate converter (SRC) function will turn ON and output will continue at 48 kHz. 30 TASCAM CD-9010