TEAC CD-9010 SYSTEM Owners Manual - Page 33
– Using the remote connectors, Using the serial connector, Fader use setting, Fader start function
View all TEAC CD-9010 SYSTEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
8 - Using the remote connectors Using the serial connector Using the REMOTE (SERIAL) connector (15-pin, D-sub, RS-232C standard), you can control the unit using a TASCAM RC-9010/ RC-9010S remote control (sold separately), a computer or other external device. Use the menu to make communication-related settings. Fader use setting Set whether or not the use of a fader on a TASCAM RC-9010/ RC-9010S remote control (sold separately) is enabled. 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select FADER MODE. Fader stop function setting The fader stop function that allows playback to be stopped or paused (playback standby) by moving the fader of a connected TASCAM RC-9010/RC-9010S remote control (sold separately) to ∞. Set whether or not this function is enabled when fader starting in also enabled on the remote. NOTE If you set both the FADER START MODE and FADER STOP MODE to DISABLE, the fader start function of the TASCAM RC-9010/ RC-9010S remote control (sold separately) will be turned OFF automatically, and its FADER START button indicator will be unlit. In this state, if you press the FADER START button on the remote control, the pop-up message "Can't Change Now, Fixed in crnt mode" appears. 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select FADER STOP MODE. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to enable or disable fader use. •• Options: ENABLE, DISABLE (default value) NOTE When set to DISABLE, the internal fader is fixed at 0 dB. 6. After making the setting, press the HOME button to return to the Home Screen. NOTE The fader mode setting is retained even when the power is turned OFF. Fader start function setting Fader start allows playback to start by moving the fader of a connected TASCAM RC-9010/RC-9010S remote control (sold separately) from ∞ when the unit is in playback standby. Enable or disable this function when fader starting is also enabled on the remote. 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select FADER START MODE. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to enable or disable the fader stop start function. •• Options: ENABLE, DISABLE (default value) 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The fader stop mode setting is retained even when the power is turned OFF. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set enable or disable the fader start function. •• Options: ENABLE, DISABLE (default value) 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The fader start mode setting is retained even when the power is turned OFF. TASCAM CD-9010 33