TEAC CD-9010 SYSTEM Owners Manual - Page 21

TASCAM CD-9010

21

4 – Playback

MONITOR PLAY STBY function

You can set how the

STANDBY

button functions during

monitoring playback.

1.

Press the

MENU

button to open the

MENU

screen.

2.

Open the

PLAY

menu screen

3.

Select

MONITOR PLAY STBY

.

4.

Press

the

DATA

dial to move the cursor right to select the

setting.

5.

Turn

the

DATA

dial to set the

STANDBY

button function

during monitoring playback.

•

NORMAL

:

Start playback standby at that point

•

BACK CUE

(default value):

Pause and enter playback

standby mode at the last cue point

6.

After

setting the value, press the

HOME

button to return

to the Home Screen.

NOTE

The MONITOR PLAY STBY setting is retained even when the

power is turned OFF.

ONLINE PLAY STBY function

You can set how the

STANDBY

button functions during online

playback.

1.

Press the

MENU

button to open the

MENU

screen.

2.

Open the

PLAY

menu screen

3.

Select

ONLINE PLAY STBY

.

4.

Press the

DATA


setting.

5.

Turn the

DATA

dial to set the function of the

STANDBY

button during online playback

•

NORMAL

(default value): If the playback mode is

CONTINUE or SINGLE, start playback standby at that

point. If the playback mode is PROGRAM, start playback

standby at the beginning of the next track.

•

BACK CUE

: Pause and start playback standby at the last

cue point.

6.

After setting the value, press the

HOME

button to return

to the Home Screen.

NOTE

The ONLINE PLAY STBY setting is retained even when the power

is turned OFF.

Repeat playback

You can repeatedly play back all tracks on the CD.

Ordinary repeat playback

When the repeat playback function is ON, depending on the

current playback mode, the following will occur:

CONTINUE

•

: the entire disc is played back repeatedly

SINGLE

•

: the current track is played back repeatedly

PROGRAM

•

: the entire program is played back repeatedly

1.

Press the

MENU

button to open the

MENU

screen.

2.

Open the

PLAY

menu screen.

3.

Select

REPEAT

.

4.

Press the

DATA


setting.

5.

Turn the

DATA

dial to set the value to

ON

(default is

OFF

).

6.

After completing the setting, press the

HOME

button to

return to the Home Screen.

To turn repeat playback OFF

Set the

•

PLAY

menu

REPEAT

item to

OFF

.

NOTE

The repeat playback setting is retained even when the power is

turned OFF.

Section	Page
Contents	5
1 – Introduction	6
Features	6
Included items	6
Conventions used in this manual	6
Intellectual property rights	7
Precautions for placement and use	7
Connecting the power	7
Beware of condensation	7
Cleaning the unit	7
About discs	7
Handling of compact discs	7
2 – Names and Functions of Parts	8
Front panel	8
Rear panel	10
Home Screen	11
Menu structure	12
Menu operation basics	13
Menu operation procedures	13
3 – Preparations	14
Turning the power ON and OFF	14
Turning the power OFF	14
Adjusting the display	14
Adjusting display contrast	14
Adjusting display and indicator brightness	15
Connecting headphones	15
Setting the panel lock function	16
4 – Playback	17
Monitoring and online playback	17
Monitoring playback	17
Online playback	17
Setting the playback mode	17
Playing a track once from the beginning	18
Playing a track from the middle	18
Automatic cue point memory (last cue)	18
Setting the playback point	19
Selecting tracks	19
Operation after selection of a track	19
Searching within tracks	19
Auto cue function	19
Auto ready function	20
Incremental playback function	20
ONLINE BACK CUE function	20
PLAY KEY FUNCTION setting	20
MONITOR PLAY STBY function	21
ONLINE PLAY STBY function	21
Repeat playback	21
Ordinary repeat playback	21
EOM functions	22
Setting EOM tally output trigger	22
How to use the EOM	22
Checking the ends of tracks	22
Setting the amount of time checked	22
How to use the end check function	22
Pitch control playback	23
Turning pitch control playback ON/OFF	23
Setting the pitch control value	23
PITCH/TIME FIT function	23
5 – Program and cue playback	24
Program playback	24
Program menu operation	24
Adding tracks to a program	24
Clearing a program	25
Removing tracks from a program	25
Moving tracks within a program	25
Cue point playback	26
Using the cue menu	26
Adding cue points	26
Clearing the cue list	26
Clearing a cue point	26
Editing cue point names	27
Editing text	27
Automatic cue point loading options	27
6 – Working with files and folders	28
Opening the BROWSE screen	28
Navigating the BROWSE screen	28
Icons on the BROWSE screen	28
Folder operations	28
File and folders on data CDs	28
7 – Other settings and information display	29
Setting the digital reference level	29
Setting the analog reference level	29
Adjusting R/L analog reference levels	29
Setting the online function	29
Master clock and digital output combinations	30
Setting the master word clock	30
Mono mix setting	30
Fail safe function setting	31
Setting the level meter display type	31
Monitoring point setting	31
Muting monitoring when online	31
Restoring the factory settings	32
Setting the digital output format	32
Viewing media information	32
Viewing system information	32
8 – Using the remote connectors	33
Using the serial connector	33
Fader use setting	33
Fader start function setting	33
Fader stop function setting	33
Fader stop action setting	34
Setting the fader scale used	34
Transmission speed setting	34
Using the parallel connector	35
Parallel port 3-pin/13-pin setting	35
9 – Message list	36
Error messages	36
Warning messages	36
Operation messages	36
10 – Troubleshooting	37
11 – Specifications	38
Media and file formats	38
Inputs and outputs	38
Analog audio inputs and outputs	38
Digital audio output	38
Control inputs and outputs	38
Audio performance	38
Backup memory	39
General	39
Dimensional drawings	39

TEAC CD-9010 SYSTEM Owners Manual - Page 21

MONITOR PLAY STBY function, Repeat playback, Ordinary repeat playback

Page 21 highlights