TEAC CD-9010 SYSTEM Owners Manual - Page 19

4 - Playback Setting the playback point Selecting tracks Use the TRACK .// buttons to select tracks. . button Press to move to the start of the current track when the elapsed time of the current track is greater than one second. When the elapsed time is less than one second, press this to skip to the beginning of the previous track. / button Press to skip to the beginning of the next track. Press again to skip to the beginning of the track after that. NOTE •• When in program playback mode, tracks will be skipped in the program order. •• When at the beginning of the first track, press the . button to skip to the beginning of the last track. When at the beginning of the last track, press the / button to skip to the beginning of the first track. Operation after selection of a track When the TRACK .// buttons are used to select a track, what happens next depends on the unit's status and auto cue function setting. (See "Auto cue function" on page 19.) When Auto Cue is ON The unit enters playback standby at the first position within the track where the signal reaches the level set using the PLAY menu AUTO CUE LEVEL item. When Auto Cue is OFF The unit enters playback standby at the beginning of the track. Searching within tracks When playback is stopped, the unit is in playback standby, or during monitoring or jog playback, press and hold the SEARCH m/, buttons to search for a cue point. While pressing one of the SEARCH , or m buttons to search within a track, you can change the search speed by pressing the other SEARCH m/, button. Auto cue function If the auto cue function is ON, and you select a track for playback, any "silence" at the beginning of the track will be skipped, and the unit will enter playback standby at the first point where the track's "signal" is audible. As a result, sound will be heard immediately when playback starts. NOTE •• When using the cue function, the Auto Cue function is disabled. •• If a track is selected when AUTO CUE is ON, the unit enters playback standby at the first point where the track is audible. •• The AUTO CUE function setting is retained even when the power is turned OFF. You can specify the threshold level (AUTO CUE LEVEL) used to detect the audio signal when the Auto Cue function is activated. In other words, any signal higher than the AUTO CUE LEVEL will be treated as "signal," and any signal lower than this level will be treated as "silence." 1. Press the MENU button to open the MENU screen. 2. Open the PLAY menu. 3. Select AUTO CUE. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the value to ON (default is OFF). 6. Press the DATA dial to move the cursor to the left, and return to menu item selection. 7. Select AUTO CUE LEVEL. 8. Press the DATA dial to move the cursor right to select the setting. 9. Turn the DATA dial to set the desired auto cue level. •• Values: -24 dB to -72 dB (6 dB steps, default -24 dB) 10. After setting the value, press the HOME button to return to the Home Screen. TASCAM CD-9010 19