TEAC CD-9010 SYSTEM Owners Manual - Page 20
Auto ready function, Incremental playback function, ONLINE BACK CUE function
View all TEAC CD-9010 SYSTEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4 - Playback Auto ready function If the auto ready function is ON, when a track finishes playing, playback standby will occur at the beginning of the next track. 1. Press the MENU button to open the MENU screen. 2. Open the PLAY menu screen. 3. Select AUTO READY. ONLINE BACK CUE function If this function is on, when the ON LINE button is turned OFF on a connected TASCAM RC-9010/RC-9010S remote control (sold separately), the unit immediately enters playback standby at the last cue point (the last point where monitoring playback started). 1. Press the MENU button to open the MENU screen. 2. Open the PLAY menu screen 3. Select ONLINE BACK CUE. 3. Press the DATA dial to move the cursor right to select the setting. 4. Turn the DATA dial to set the value to ON (default is OFF). 5. After setting the value, press the HOME button to return to the Home Screen. NOTE •• If the auto cue function is set to ON, the unit enters playback standby at the point where sound starts in the next track rather than at the very beginning of the track. •• The auto ready function setting is retained even when the power is turned OFF. Incremental playback function When the incremental playback function is ON, and the unit is playing back, you can use the PLAY button to start playback from the beginning of the next track or the STOP button to enter playback standby at the beginning of the next track. 1. Press the MENU button to open the MENU screen. 2. Open the PLAY menu screen. 3. Select INCREMENTAL PLAY. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the value to ON (default is OFF). 6. After setting the value, press the HOME button to return to the Home Screen. NOTE •• When the incremental playback function is set to ON and the unit is in playback standby mode, pressing the PLAY button will start playback from that position. In playback standby, pressing the STOP button will stop playback. •• When the last track of the CD is being played, pressing PLAY starts playback of the first track on the CD. Pressing STOP pauses at the beginning of the first track on the CD. •• The incremental playback function setting is retained even when the power is turned OFF. 20 TASCAM CD-9010 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the value to ON (default is OFF). 6. After setting the value, press the HOME button to return to the Home Screen. NOTE The ONLINE BACK CUE function setting is retained even when the power is turned OFF. PLAY KEY FUNCTION setting When the ON LINE button is turned OFF on a connected TASCAM RC-9010/RC-9010S remote control (sold separately), the PLAY button operates as described below. When set to Normal Pressing the PLAY button during playback has no effect. If INCREMENTAL PLAY is set to ON, however, pressing the PLAY button during playback allows incremental playback. When set to Back Cue If the incremental play function is OFF, pressing the PLAY button skips to the last cue point and continues playback. Pressing the PLAY button in this case activates monitoring playback (monitoring outputs ON, line outputs OFF). 1. Press the MENU button to open the MENU screen. 2. Open the PLAY menu screen. 3. Select PLAY KEY FUNCTION. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the function when online playback mode is OFF (default is OFF). Values are NORMAL (default value) and BACK CUE. 6. After setting the value, press the HOME button to return to the Home Screen. NOTES •• Similar operation is possible using the MONITOR button. •• The PLAY KEY FUNCTION setting is retained even when the power is turned OFF.