TEAC CD-9010 SYSTEM Owners Manual - Page 27

5 - Program and cue playback Editing cue point names 1. Press the MENU button to open the MENU screen. 2. Open the PROGRAM/CUE menu screen 3. Select CUE LIST EDIT. 4. Press the DATA dial to open the CUE screen. 5. Turn the DATA dial to select the cue point with the name to be edited, and press the DATA dial to open the CUE menu. 6. Turn the DATA dial to select EDIT CUE TITLE. Automatic cue point loading options Usually when a disc for which cue points have already been saved is loaded, the previous cue points are automatically loaded. Sometimes, though, you might not want to use the memorized cue points. You can set whether or not memorized cue points are automatically loaded. 1. Press the MENU button to open the MENU screen. 2. Open the PROGRAM/CUE menu screen. 3. Select CUE POINT LOAD. 7. Press the DATA dial to open the EDIT CUE TITLE screen. 4. Press the DATA dial to move the cursor to the right and select the setting. 8. Edit the cue point name. See "Editing text" below for instructions 9. When you are done editing the name, press the BROWSE button to confirm the name change and return to the CUE list screen. NOTE •• Names containing characters other than the letters of the alphabet, numbers and symbols cannot be edited. •• The following symbols and punctuation marks cannot be used in names Cue point names can be up to six single-byte characters in length. Editing text Edit text using the following operations. To move the editing (cursor) position Use the SEARCH m/, buttons. To change the character at the cursor position Turn the DATA dial. To confirm the character at the cursor position Press the DATA dial. To insert an empty space Press the TRACK / button. To delete a character Press the TRACK . button. To confirm and end editing Press the BROWSE button. 5. Turn the DATA dial to change the setting for memorized cue point loading. •• LOAD (default): Automatically load previously memorized cue points •• UNLOAD: Do not load memorized cue points •• SELECT: Every time the power is turned ON, a pop-up menu appears that lets you decide whether or not to load cue points. The setting you select stays active until the power is turned OFF again. Pop-up that appears when set to SELECT 6. Press the DATA dial again to set the cue list load setting, and return to the PROGRAM/CUE menu screen. 7. Press the HOME button to return to the Home Screen. NOTE When set to UNLOAD (or when set to SELECT and you chose not to load cue points), the unit will function as follows. •• New cue points that are added will not be saved. •• When the active device is changed, all cue points will be cleared. •• When the setting is changed from UNLOAD to LOAD (and vice versa), the change will become effective the next time the unit is turned ON again. (The cue list will not be loaded immediately when set to LOAD.) •• When set to UNLOAD, exporting the cue points will not export the recently added ones. (It will export the points added when last set to LOAD.) TASCAM CD-9010 27