TEAC CD-9010 SYSTEM Owners Manual - Page 34
Fader stop action setting, Setting the fader scale used, Transmission speed setting
![]() |
View all TEAC CD-9010 SYSTEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
8 - Using the remote connectors Fader stop action setting When the fader start function is ON, you can set whether using the fader stop function (lowering the fader to ∞) on a TASCAM RC-9010/RC-9010S remote control (sold separately) causes playback to stop or pause (playback standby). 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select FADER STOP ACT. Transmission speed setting You can set the transmission speed (baud rate) used with a TASCAM RC-9010/RC-9010S remote control (sold separately) or other remote control using serial protocol. NOTE The following serial transmission values are fixed: 8 data bits, No parity bit, 1 stop bit. 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select SERIAL BAUD RATE. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the action when fader stop occurs. •• Options: STOP, STANDBY (default value) 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE •• Depending on the PLAY menu screen MONITOR PLAY STBY item and ONLINE PLAY STBY settings, BACK CUE operation might take place. •• The fader stop act setting is retained even when the power is turned OFF. Setting the fader scale used You can set whether to use the scale shown on the left or right side of the fader on a TASCAM RC-9010/RC-9010S remote control (sold separately). The indicator above the active scale lights. 1. Press the MENU button to open the MENU screen. 2. Open the REMOTE menu screen. 3. Select FADER SCALE. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the baud rate used to communicate with external remotes. •• Options: 9600bps, 19200bps, 38400bps, RC (for TASCAM RC-9010/RC-9010S, default value) 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The serial baud rate setting is retained even when the power is turned OFF. 4. Press the DATA dial to move the cursor right to select the setting. 5. Turn the DATA dial to set the fader scale used. •• Options: 10dB MAX (left scale), 0dB MAX (right scale, default value) 6. After completing the setting, press the HOME button to return to the Home Screen. NOTE The fader scale setting is retained even when the power is turned OFF. 34 TASCAM CD-9010
![](/manual_guide/products/teac-cd9010-owners-manual-553e6df/34.png)