TEAC CD-9010 SYSTEM Owners Manual - Page 26
Cue point playback, Using the cue menu, Adding cue points, Clearing the cue list
View all TEAC CD-9010 SYSTEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5 - Program and cue playback Cue point playback You can locate to and play back from cue points you have set earlier. You can set up to nine cue points for each CD and save cue points for up to 500 discs. Using the cue menu Select CUE LIST EDIT and press the DATA dial to open the CUE screen (cue list). Select the desired item, and press the DATA dial to open the CUE MENU pop-up. ADD CUE Add a cue point at the current playback position. DELETE ALL CUE Clear all cue points from the cue list. DELETE CUE Clear the selected cue point. EDIT CUE TITLE Open the EDIT CUE TITLE screen where you can edit the name of the selected cue point. (See "Editing cue point names" on page 27.) CANCEL Close the CUE menu without performing any operation, and return to the CUE screen. Adding cue points Follow these procedures to add cue points. 1. Press the MENU button to open the MENU screen. 2. Open the PROGRAM/CUE menu screen and select CUE LIST EDIT. 3. Press the DATA dial to open the CUE list screen. 4. Turn the DATA dial to select the cue point number to add. 5. Press the DATA dial to open the CUE menu. 8. Repeat steps 5-7 to add cue points as desired. The screen shows the track numbers and cue points. 9. When you are done adding cue point, press the HOME button to return to the Home Screen. NOTE CUE settings are retained even when the power is OFF. Clearing the cue list 1. Press the MENU button to open the MENU screen. 2. Open the PROGRAM/CUE menu screen and select CUE LIST EDIT. 3. Press the DATA dial to open the CUE screen. 4. Turn the DATA dial to select Cue List. 5. Press the DATA dial to open the CUE menu. 6. Turn the DATA dial to select DELETE ALL CUE. 7. Press the DATA dial to clear all cue points in the cue list. After the cue points have been cleared, the CUE list screen reopens. 8. Press the HOME button to return to the Home Screen. Clearing a cue point 1. Press the MENU button to open the MENU screen. 2. Open the PROGRAM/CUE menu screen and select CUE LIST EDIT. 3. Press the DATA dial to open the CUE list screen. 4. Turn the DATA dial to select the cue point to be cleared 5. Press the DATA dial to open the CUE menu. 6. Turn the DATA dial to select DELETE CUE. 6. Turn the DATA dial to select ADD CUE. 7. Press the DATA dial to clear the highlighted cue point. After the cue point has been cleared, the CUE list screen reopens. 7. Press the DATA dial to add the cue point. The current time of the track being played back (or in standby) will be added as a cue point to the cue list. 26 TASCAM CD-9010 8. Press the HOME button to return to the Home Screen.