TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 112
LED Control, 6. 7. 3. Feedback, To set time automatically, To set Daylight Saving Time
![]() |
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 6 Configure the Router in Range Extender Mode • To set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II. 3. Click Get GMT to get time from the internet if you have connected to the internet. • To set Daylight Saving Time: 1. Select Enable DaylightSaving. 2. Select the start time from the drop-down list in the Start field. 3. Select the end time from the drop-down list in the End field. 4. Click Save. Note: This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the router successfully; otherwise, time-based functions will not take effect. 6. 7. 2. LED Control The LED Control allows you to turn on or off the LEDs on your device according to a specific time schedule. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to System Tools > LED Control. 3. Enable the Night Mode. 4. Set the LED Off Time and click Save. 6. 7. 3. Feedback This page allows you to send your questions or suggestions to us, so that we can resolve your issues and keep improving product features to give you a better network experience. For technical problems, it is recommended to attach the configuration file or system log of the device to help us investigate your case. 107
![](/manual_guide/products/tplink-archer-a54-archer-a54us-v16-user-guide-8582384/112.png)