TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 38
DHCP, 4. 8. 1. DHCP Settings, By default
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Configure the Router in Wireless Router Mode 7. Click Save. 4. 8. DHCP By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 4. 8. 1. DHCP Settings 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to DHCP > DHCP Settings. 3. Specify DHCP server settings and click Save. • DHCP Server - Enable or disable the DHCP server. If disabled, you must have another DHCP server within your network or else you must configure the computer manually. • Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. • End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. • Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed to connect to the router with the current dynamic IP Address. When time is up, the user will be automatically assigned a new dynamic IP address. 33