TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 22
Service Name/Server Name, Connect on Demand
![]() |
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 4 Configure the Router in Wireless Router Mode • Username/Password - Enter the user name and password provided by your ISP. These fields are case-sensitive. • Confirm Password - Enter the password provided by your ISP again to ensure the password you entered is correct. • Secondary Connection - It's available only for PPPoE connection. If your ISP provides an extra connection type, select Dynamic IP or Static IP to activate the secondary connection. • Connection Mode • Always On - In this mode, the internet connection will be active all the time. • Connect on Demand - In this mode, the internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be reestablished when you attempt to access the internet again. If you want to keep your internet connection active all the time, please enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your internet access disconnects. • Connect Manually - You can click Connect/Disconnect to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand mode. The internet connection can be disconnected automatically after a specified inactivity period (Max Idle Time) and not be able to re-establish when you attempt to access the internet again. • Authentication Type - Choose an authentication type. Note: Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some applications are visiting the internet continually in the background. If you want to do some advanced configurations, please click Advanced. • Service Name/Server Name - The service name and server name should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work. • MTU (Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP. 17
![](/manual_guide/products/tplink-archer-a54-archer-a54us-v16-user-guide-8582384/22.png)