TP-Link Archer A54 Archer A54US V1.6 User Guide - Page 122
Status, WDS status, Survey the SSID to be bridged, Disable DHCP, Now you can go
![]() |
View all TP-Link Archer A54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
2 ) Click Save. Note: Log in to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged: 1 ) Go to Wireless > Wireless Settings and click Enable WDS Bridging. 2 ) Click Survey, locate the root router's SSID and click Choose (Here we take TP-Link_2512 as example). 3 ) If the root router is set with a wireless password, you should enter the wireless password of the root router. 4 ) Click Save. 4. Disable DHCP: 1 ) Go to DHCP, select Disable, and click Save. Now you can go to Status to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 117
![](/manual_guide/products/tplink-archer-a54-archer-a54us-v16-user-guide-8582384/122.png)
117
2 )
Click
Save
.
Note:
Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 )
Go to
Wireless
>
Wireless Settings
and click
Enable WDS Bridging
.
2 )
Click
Survey
, locate the root router’s SSID and click
Choose
(Here we take
TP-Link_2512 as example).
3 )
If
the root router is set with a wireless password, you should enter the wireless password
of the root router.
4 )
Click
Save
.
4. Disable DHCP:
1 )
Go to
DHCP
, select
Disable
, and click
Save
.
Now you can go to
Status
to check the WDS status. When the
WDS status
is
Run
, it
means WDS bridging is successfully built.